Deep Sea Drilling Vessel Chikyu
This highly detailed kit of the Chikyu was developed with the
full cooperation of Jamstec. Primarily a snap-together kit, although
Bandai says you may want to glue on some of the smaller details.
Can be built as either a full-hull or waterline model. Parts are
molded in multiple colors, so a very nice model can be had with
no painting at all.
"Black Swan" Pirate Sailing Ship Model
This kit is one of the most detailed sailing ships ever made in
plastic. This is essentially the same kit as Zvezda's
previous Black Pearl released in Europe, with a different
headmast swan figure, and some other minor changes. Sails
are made of hard plastic with fine texture. Rigging and stand
included. The ship is around 21-1/2 inches long when built.
1/20 Chris Craft Constellation 30-inch Boat Plastic Model
Includes 1pc full hull, anchor, rudders, chrome plated fittings,
molded curtains/venetian blinds, dingy with oars, stainless steel
wire deck railings, decals and hardware.
Searcher Le Suroit
Built by the Channel shipyards at Dieppe and brought into service
in April 1975 this ship was the second after "Ie Noroit"
of the Oceanographic Research and Support series of vessels. The
Suroit made a positive contribution in the search for the wreck
of the Titanic during the summer of 1985 thanks to the trailing
sonar detector, a highly precise detection instrument. Model kit
features: Kit features 2-piece full hull, well detailed decks
and superstructure, ship's boats, deep-sea submersible 'Cyana',
injection-molded railings, display cradles and name plate. Completed
model is approximately 11.1" long. Painting guide and decals
for ship's appearance in 1985 - includes ensign, waterline boot
top and other hull markings.
Exploration Vessel with mini sub, Helicopter, diver, and shark
Detailed two-piece hull with observation ports, Detailed decks
with rails, Helicopter landing pad, Rotating crane aft, Hughes
300C helicopter, 2 diver figures with shark cage, 2 sharks, Rubber
dinghy, 2 tenders, 3 submarines, Display stand and Decals. 139
pieces. Measures 13 inches long.
Presidential Lines" Ocean Liner Model Kit
Measures around 17.5" long. This model represents an ocean
liner built by the Dollar Steampship Lines around 1930. There
were two ships: the SS Presidential Hoover and her sister ship,
the SS Presidential Coolidge. The SS Hoover ran aground off Taiwan,
the Coolidge was converted to a troopship in 1941 and lost in
1942. These were state of the art ships at the time with air conditioning
and a "phone in every room".
Mary II Ocean Liner Model Kit
Measurers 33 inches long when complete! Features 550 Pieces crisply
molded in white, detailed decks, lifeboats, lots of clear sprues
for all the hundreds of windows and skylights, Nice thin molded
railings and Huge decal sheet with stipe for hull included, Sturdy
box great for shipping.
Highly detailed plastic pieces molded in white and clear, Option
to build AIDAdiva, AIDAbella or AIDAluna, Two-piece hull with
many structural detail, Imitation bow and stern jet vane, 2 side
stabilisers that can be folded out, 6 tenders, 10 lifeboats and
2 speedboats, plus much more. Length: 24.96" Parts: 376.
Atlantic Fishing Trawler
This detailed replica has winches and booms included. This realistic
rigging has premolded sails. Highly detailed kit comes with display
base and measures around 17-1/2 inches long.
Plastic model of a Shrimp Boat. Everything is there except the
shrimp and the smell. This detailed model kit has winches and
booms included with a realistic rigging stand. This boat is very
similar to the the "Jenny" used in the Forest Gump movie.
Includes display base and measures around 12 3/8 inches long.
Plastic model of a famous diesel powered tuna boat. It has fish,
spotting tower, life boats and a stand included. Highly detailed
kit comes with display base and measures around 14 inches long.
Boat Ryo Fuku Maru
This highly detailed scale plastic model kit accurately recreates
a typical japanese tuna fishing boat, the Ryo Fuku Maru No. 31,
which belonged to a celebrated local "pole and line"
bluefin tuna fisherman, named Osam Yamazaki. This is a unique
kit, molded in three colors, with really interesting detail not
normally found in watercraft kits. The kit includes a highly detailed
deck and wheelhouse, crew figure and an amazing array of various
simulated night lighting. The support structure also included
HF, VHF, UHF and satellite antennas and winch. Precise decals,
rigging thread and an impressive full color, celebration "Flag"
decal sheet is included along with a display stand to make this
1/64 scale kit a magnificent and interesting addition to any sailing
The harbour tugboat, or, "work-horse of the coast”,
tows gigantic, sea-going vessles safely into harbor. The small,
robust, manuverable boats have very powerful engines developing
horsepower in the thousands. When cargo vessels come into harbor,
having covered thousands of sea miles, they still have a difficult
stretch ahead of them. This is where the Harbor Tug comes into
their own, takes over command and tows these gigantic ships safely
alongside the quay. This kit features a one piece hull, ram-guard,
structurally detailed super-structure, lifeboat, rubber dinghy,
2 masts, Captain and 2 seamen figures, 2 display stands, and detailed
decals. 89 pieces.
Boat Model Kit
1-72 Scale. 95 pieces. It measures @ 11.5" long when complete.
Detailed instructions included.
and Merrimack ships
This classic set comes with 2 ships and a diorama seascape display
base. The monitor measures 8 1/4 inches long and the Merrimac
measures 15 inches long.
Highly detailed kit comes with display base and measures 13 1/2
Steamboat Robert E Lee
Historically accurate scale model. Includes 2 paddle wheels, steerable
rudder, lifeboats, rigging thread, flag and pennant decal, and
Highly detailed kit comes with display base and measures 17 1/4