F16 NATO Viper
ROK Air Force Black Eagles
Cartograph decals. Two pilot figures included.
(Not an F16, but a cool model all the same ! )
Block 32/52 Thunderbirds 2009 Far East Tour
Falcon 'Top Falcons'
Eduard Models Scale assembly and painting required plastic model
kit of the Lockheed Martin F-16A Fighting Falcon, a multirole
fighter jet of the United States Air Force. Model kit features:
Lockheed Martin multirole jet fighter as employed for test and
combat training. Kit has engraved panel lines, well-appointed
cockpit, intake trunk with compressor face, optional position
speed brakes, well represented landing gear and wheel bays, exhaust
pipe with afterburner flame holder, separately molded leading
edge flaps, flaperons and rudder plus optional position multi-part
canopy. Also features optional external stores (pylons, TERs,
launch rails, 370 gallon drop tanks, 300 gallon centerline tank,
AIM-9Ms, AIM-120Bs, AGM-65s, GBU-12s, GBU-31s, GBU-24s, GBU-38s,
CBU-87s, AN/ALQ-131, AN/AAQ-14 and Sniper XR). Includes die-cut
canopy and wheel masks plus photo-etch parts (fine interior and
exterior fine details, color seatbelts, color instrument panels)
and resin parts (ejection seat, wheels, turbine faces and exhaust
nozzle). Plastic is ex-Kinetic mold. Decals and color painting
guide for (5) aircraft: US Navy version A Block 15AM OCU, s/n
90-0943, NSAWC, NAS Fallon, 2002-2008; US Navy version A Block
15AR OCU, s/n 92-0409, NSAWC, NAS Fallon, 2002-2008; US Navy version
A Block 15AM OCU, s/n 90-0947, NSAWC, NAS Fallon, 2003-2008; US
Marine version A Block 15AM OCU, s/n 90-0947, NSAWC, NAS Fallon,
2003-2008 and US Air Force version A Block 15C, s/n 81-0688, U.S.
Air Force Flight Test Center, Edwards AFB, 1993-1995. Model length:
313mm. Wingspan: 207mm. Plastic parts: 450. Photo-etched parts,
Martin F-16CJ Block 50 Fighting Falcon
New tooling from Tamiya--Model represents the F-16CJ (Block 50)
as used for USAF SEAD missions. Sleek fuselage including aerodynamic
blended wing body design accurately reproduced. Accurately curved
bubble top canopy can be assembled in the opened or closed position.
Horizontal stabilizers are movable and flaperons can be modeled
in both the up or down positions. A range of weapons and accessories
are included such as HARM, AMRAAM, and Sidewinder missiles (M
& X variants), detachable external fuel tanks, ECM pod, and
HTS pod. One pilot figure included and can be depicted with either
standard or JHMCS flight helmet. Detailed markings for 3 aircraft,
including the 5th Air Force commander's aircraft stationed at
Misawa airbase in 2005, are included.
Aggressor / Adversary
Highly Detailed Static Display Model, Comes with 1 Pilot Figure,
Parts included to Depict either F-16C BLK 30,32,42 or F-16N. Includes
4 different Markings
AK, & WA
Sufa (Storm) Israeli Air Force Aircraft
The two-seater, Israeli Air Force F-16I Sufa is the largest F-16
acquisition in Israel's military history. The plane has a higher
takeoff weight than any other F-16, and is armed with the AMRAAM
air-to-air missiles. The plane's extended flight range allows
it to attack targets in Iran without having to refuel. The plastic
model kit of this airplane is a highly-detailed, accurate reproduction
of the vehicle. Kit includes over 450 parts including all newly
tooled weapons: AIM-9M/X, AIM-120B/C, AGM-65, GBU-24, GBU-31,
CBU-87, GBU-12, GBU-38, pitot tube and photo-etched CFT exhaust
port. 450+ parts.
Fighting Falcon "Special Colors"
Block 15 NATO Viper Fighting Falcon Aircraft
The F-16 NATO Viper is an single-engine, multi-role tactical aircraft,
equipped with an M61 Vulcan cannon in the left wing root, and
is often armed with the AIM-120 AMRAAM. It also has the capability
to be armed with numerous air-to-air or air-to-ground missiles,
and rockets or bombs, all carried on hard points under the wing.
Norway was the last of the four NATO countries to replace the
F-104G with the more modern F-16, which is much simpler and lighter
than its predecessors, despite extremely advanced controls and
avionics. This plastic model kit is a highly-detailed, accurate
representation of the plane. Contains over 450 parts including
Mid-Life-Update/ADF upgrade parts, small mouth intake, PW nozzle,
AGM-119 missiles, AAQ-28 sniper pod as well as other weapons.
Markings for Norway, Denmark, Belgium, The lands Air Force. Over
12" long and 8" wingspan.
A/B Fighting Falcon Aircraft
F-16 is the word's most widely used combat aircraft of to day.
About 2000 units are in service with the Air Forces of 18 nations.
Thanks to its versatility the aircraft covers the roles of a fighter
and attack aircraft as well as reconnaissance plane. The standardization
enables the Air Force to use one single prototype and thus save
costs in training and maintenance.
F-16CJ Block 50 Fighting Falcon Jet with F110-GE-129 Jet Engine
This model kit depicts the specialized variant F-16CJ Block 50,
which has been modified to perform "Wild Weasel" or
the Suppression of Enemy Air Defenses (SEAD) missions. The F-16
CJ Block 50 Fighting Falcon is equipped with high-tech targeting
and target acquisition system to seek out surface-to-air threats
and defeat them with AGM-88 High-speed Anti-Radiation Missile
(HARM) and AGM-45 Shrike anti-radiation missiles. Features a hook
and rail system to slide the engine in and out of the aircraft
after assembly, dolly to display the beautiful scale replica of
the GE F-110 afterburning turbofan engine, moveable ejector seat,
optional clear or tinted canopy, 1 highly detailed pilot figure,
rubber tires, lots of photo-etched parts, movable flaps, stabilizer
fins and nose cone, missiles removable after assembly, and specially
designed box to allow storage of the assembled aircraft model.